Filter
Top Products
2-21
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 2 Setting Up and Configuring the Multi Services Platform
Performing the Initial Configuration of the Multi Services Platform
d. (Optional) If this server will access up to 3 DNS servers, enter the IP address
of the servers in the Name Server 1, Name Server 2, and Name Server 3 fields.
e. (Optional) In the Domain Search field, enter one or more domains for
searching. Separate multiple domains with a comma, space, or carriage
return.
f. Click OK.
Step 8 In the Network Address Setup area, click Next.
The Network Card Configuration Overview area appears.
Step 9 In the Network Card Configuration Overview area, click Finish.
The Multi Services Platform is now operating on the network.
Setting the System Time
This section describes how to set the time for the Multi Services Platform. It is
important to set the time correctly so that the VSM system can accurately
maintain information for video recording.
To set the time for the Multi Services Platform, follow these steps:
Procedure
Step 1 Access the YaST Control Center window as described in the “Powering On the
System and Accessing the YaST Control Center” section on page 2-12.
Step 2 In the left panel of the YaST Control Center window, click System, then click
Date and Time in the right panel, as shown in
Figure 2-12.