Filter
Top Products
-22-
1. Press the
/ / button to switch
between Drive modes until the selected
drive mode icon appears on the LCD
monitor.
2. Shoot the image.
Shooting with Self-Timer
• If you selected Self-Timer ( ), after the Shutter button is fully pressed down, the red
Self -Timer LED in the front of the camera will blink slowly for 7 seconds, faster for the
remaining 3 seconds, then the image will be captured.
• The Self-Timer is automatically deactivated once the image is taken.
Continuous Shooting
• The camera will automatically and continuously capture 3 consecutive images at
approximately 1 images per second in 1600 x 1200 resolution.
• To exit the Continuous Shooting function, press the
button until disappears
from the LCD.
Settin
g
Description
Ten seconds
3 images at 1600 x 1200 resolution
1. Focus range mentioned is the distance between the camera
lens surface and the subject.
2. Any flash setting can be used in macro mode.
3. Always use the LCD monitor to compose images in macro
mode. Shooting with the optical viewfinder is possible,
however, images composed with the optical viewfinder might
be off-center due to the parallax phenomenon.
Settin
g
the Sel
f
-Time
r
and Continuous Shootin
g