Filter
Top Products
-38-
Macintosh
1. In the Apple Menu on the Menu bar, select About this Computer.
2. A window will appear with the computer’s operating system version. Confirm that your
computer is version 9 or higher.
No installation of software is necessary for Macintosh users, please go to Page 47 for
connecting your camera to the computer.
Do not connect the camera to your computer BEFORE the camera drivers and
Microsoft DirectX 9 installation is completed.
Step 1 Make sure your camera is powered off and not connected to the computer.
Step 2 Make sure the computer is powered on and Windows 98 or 98SE is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after
the CD-ROM has been inserted, click on “My Computer” either on the
Desktop or in the Start Menu and locate the CD-ROM Drive. Double click on
the CD-ROM Drive icon for installation and proceed to Step 5.
Step 5 Select the language. Click [OK]. (fig. 1.1)
Step 6 The installation screen will appear. Click on Install Camera Drivers. (fig. 1.2)
Step 7 Click [Next >]. (fig. 1.3)
INSTALLING THE DRIVER AND DIRECTX 9 –
WIND
OWS 98/98SE
fig. 1.1
fig. 1.2