Filter
Top Products
40 RECORDING - ADVANCED OPERATION
LCD MONITOR DISPLAY - ADVANCED
Microphone indicator
Exposure compensation
White balance (p. 50)
Digital zoom (p. 59)
Image size (p. 48)
Image quality (p. 48)
Drive mode (p. 44)
Frame counter (p. 49)
Focus signal (p. 31)
Flash modes (p. 32)
Spot-metering area (p. 53)
Date-imprinting indicator (p. 58)
Camera-sensitivity display (p. 52)
Metering-mode indicator (p. 53)
RECORDING - ADVANCED OPERATION
EXPOSURE COMPENSATION
The camera exposure can be adjusted to make the final picture lighter or
darker by as much as ±2Ev in 1/3 increments with still image and movie
recording. The exposure-compensation value will remain in effect until it has
been reset. Exposure compensation can also be set in section 2 of the
recording-mode menu (p. 54). The function controlled with the left/right keys of the
controller can be changed with the menu, see page 51.
The exposure compensation must be set before the image is captured. When setting the
exposure compensation, the amount of compensation is shown next to the exposure-
compensation icon on the monitor. When set to any value other than 0.0, the icon will
remain on the LCD monitor as a warning. To set the exposure compensation, the monitor
must be on.
Color mode (p. 56)
Zoom indicator (p. 59)