Filter
Top Products
28D-Link DCS-5605/DCS-5635 User Manual
1
Video 1 - Click to use Video Prole 1. You can change the settings in the Setup > Audio and Video section.
Video 2 - Click to use Video Prole 2. You can change the settings in the Setup > Audio and Video section.
Video 3 - Click to use Video Prole 3. You can change the settings in the Setup > Audio and Video section.
Video 4 - Click to use Video Prole 4. You can change the settings in the Setup > Audio and Video section.
Full Screen - Click to view video at full screen. Press ESC to go back to normal view.
Snapshot - Click to take a snapshot of the current video. The image will pop up in a new window and you may save this image
to a local hard drive.
Record - Click to start recording video. Click again to stop recording.
Set Path - Click to select a folder to save video and snapshots.
Audio On/Off - This button toggles the built-in microphone on and off, allowing you to hear audio from the area surrounding
your camera. Audio is on by default.
Talking On/Off - This will toggle audio to a speaker (not included) connected to the camera’s Audio Out port. This can be used
to communicate with others near the camera.
Digital Output - Click to turn on digital output.
Digital Zoom - This button toggles the zoom feature on and off. When zoom is active, you may left click to zoom in or right click
to zoom out.
1
2
3
4
5
6
7
8
9
10
11
12
2 3 4 5 6 7 8 9
10
11 12