Filter
Top Products
58D-Link DCS-5605/DCS-5635 User Manual
Snapshot
When select the option, you can send a still image from this unit as an attachment of an E-mail or to an FTP server.
Select the Motion Detection option to transfers images to the specied FTP site or E-Mail address when there are
motions detected. Select the D/I Signal 1 option to transfers images to the specied FTP site or E-Mail address
when Digital Input 1 is active.
Select this option to record snapshots all the time.
Select this option to record snapshots based on the specied time period.
E-Mail Setting
If you select the option, the current still image is captured and an E-mail with the captured image le attached is
sent to the recipient E-mail address.
This will be the username that was given by your ISP (Internet Service Provider). This could be smith or smith@
yourisp.com depending on your particular ISP.
The password that you set up to view your e-mail account.
The host name of the e-mail server (for example, smtpserver.yourdomain.com).
The sender’s email address that appears in the email alert (for example, smith@isp.com). Notication will be sent
to this email address if the e-mails failed to be delivered to the recipient email address.
This is the email address that will receive all the captured images.
This is the port that your email SMTP service is running on. Default is 25.
These two protocols (SSL is succeeded by TLS) are cryptographic protocols that provide secure communication
on a network.
Enable Snapshot:
Trigger Event:
Continuous (FTP Only):
Scheduled (FTP Only):
E-mail Address:
User Name:
Password:
SMTP Mail Server:
Sender E-mail Address:
Recipient E-mail Address:
Port:
TLS/SSL: