Filter
Top Products
35D-Link DCS-5605/DCS-5635 User Manual
LAN Settings
Click to allow a DHCP server on your network such as
a router to assign your camera IP settings.
Click to manually enter the network settings of your
camera. You will need to enter data in the next 5 boxes.
Enter an IP address for your camera. This will be the IP
address to access the web-based conguration utility
in the future.
Enter the subnet mask of your network.
Enter the gateway IP address. This is usually the IP
address of your router.
Enter the primary DNS server IP address. This is usually
the IP address of your router.
Enter a secondary DNS server IP address.
Check to enable UPnP (Universal Plug and Play). This will allow an icon representing the camera in My Network Places
in Windows.
Check to enable UPnP Port Forwarding. If enabled, set the HTTP and RTSP ports below.
Enter the HTTP port for the camera. The default port is 80. If you have more than one camera, you must assign different
ports on each camera. This port is used to view the camera from the Internet.
Enter the RTSP port. The default port is 554. RTSP (Real Time Streaming Protocol) is used for viewing video from a
RTSP client. Clients are available for your computer or mobile phone.
DHCP
Connection:
Static IP
Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP Port
Forwarding:
External HTTP
Port:
External RTSP
Port: