Filter
Top Products
64D-Link DCS-5605/DCS-5635 User Manual
To record video to your Samba network drive or an inserted Micro SD memory card, go to the Setup > Recording section. If you want to
record snapshots to your FTP server or sent to your email, skip to the next page.
Step 1 - Check the Enable Recording box.
Step 2 - Under Record to, select either SD Card or Samba Network Drive.
If you select Samba, entered the required information.
Step 3 - Under Recording Options, select the following options:
• Resolution - Select the video prole from the drop-down
menu.
• Record until xxx MB of free space - Enter the amount of
free space on the selected drive before either stop recording
or overwrite old recordings.
Step 4 - Under Recording Method, select Event Based and then select
Motion Detection Triggered Recording and/or Input 1 Triggered
Recording.
Step 5 - Enter the Prerecord and Postrecord time in seconds. For
example, if you enter 4 seconds for both, the camera will record
4 seconds before the trigger and then 4 seconds after the event
has ended.
Step 6 - Click Save Settings. Skip to page 65 to continue.