Filter
Top Products
26D-Link DCS-7110 User Manual
Conguration
PTZ Control
This camera supports both “digital“ (e-PTZ) and “mechanical“
pan/tilt/zoom control. Please refer to PTZ Control for detailed
information.
Mechanical PTZ: Connect the camera to a PTZ driver or
scanner via RS-485 interface.
Digital PTZ: Control the e-PTZ operation. It allows users
to quickly move the focus to a target area for close-up
viewing without physically moving the camera.
ePT Direction
Home: Move the camera to the preset home position.
Direction: Control the camera’s pan or tilt directions (up/down/left/
right).
Focus
Control camera focus to get a clear image. (Available only under
mechanical PTZ mode*)
Focus Near Focus Far
Zoom
Zoom in/out to magnify or shrink the digital image.
Zoom in: Magnify image
Zoom out: Diminish image
Patrol Auto Pan
Patrol: Patrol executes a pre-dened sequence of pan, tilt,
zoom, and focus features Before selecting this, users must
dene at least two preset points.
Auto Pan: Auto Pan automatically scans an area
horizontally.
Go Preset
Select from the preset drop-down list to quickly move the camera
to the desired preset position.
Speed Control
Control Pan/Tilt/Zoom speed
Pan Speed Control
Tilt Speed Control
Zoom Speed Control
*See "Mechanical PTZ" on page 65 for more information about the installation of a PTZ scanner.
Mechanical PTZ
Control Panel*
Digital PTZ
Control Panel