Filter
Top Products
41D-Link DCS-7110 User Manual
Conguration
Port and Access Name Settings
HTTPS
By default, the HTTPS port is set to 443. It can also be assigned to another
port number between 1025 and 65535.
FTP
The FTP server allows the user to save recorded video clips. You can utilize
D-Link's IP Cam Wizard to upgrade the rmware via FTP server. By default,
the FTP port is set to 21. It also can be assigned to another port number
between 1025 and 65535.
HTTP
By default, the HTTP port is set to 80 and the secondary HTTP port is set to
8080. They can also be assigned to another port number between 1025 and
65535.
Authentication: Depending on your network security requirements, the
camera provides two types of security setting for an HTTP transaction: basic
and digest. If basic authentication is selected, the password is sent in plain
text format and there can be potential risks of being intercepted. If digest
authentication is selected, user credentials are encrypted using MD5 algorithm
and thus provide better protection against unauthorized accesses.
Access name for stream 1 ~ 5: The Network camera supports multiple
streams simultaneously. The access name is used to differentiate the
streaming source. Users can click Setup > Video > Video Settings to set up
the video quality of linked streams.
RTSP
To utilize RTSP streaming authentication, make sure that you have set a
password for the camera rst. Please refer to User Settings for details.