Filter
Top Products
54D-Link DCS-7110 User Manual
Conguration
Tamper Detection
With tamper detection, the camera is capable of detecting incidents such as
redirection, blocking or de-focusing, or even spray paint.
To enable tamper detection, follow the steps given below:
1. Select Enable camera tampering detection.
2. Enter the tamper trigger duration (10 sec. ~ 10 min.). The tamper alarm
will be triggered only when the tampering factor (the difference between
current frame and pre-saved background) exceeds the trigger threshold.
Set up the event source as Camera Tampering Detection on Event Settings >
Server Settings (how to send alarm message)/ Media Settings (send what type
of alarm message)/Event Settings/. Please refer to Event settings for detailed
information.