59D-Link DCS-7110 User Manual
Conguration
Pre-event recording: The camera has a buffer area. It temporarily holds data
up to a certain limit. Enter a number to decide the duration of recording before
a trigger is activated. Up to 9 seconds can be set.
Maximum duration: Specify the maximum recording duration in seconds.
Up to 20 seconds can be set. For example, if pre-event recording is set
to 5 seconds and the maximum duration is set to 10 seconds, the camera
continues to record for another 4 seconds after a trigger is activated.
Maximum le size: Specify the maximum le size allowed.
File name prex: Enter the text that will be appended to the front of the le
name.
Click Save to enable the settings, then click Close to exit the page.
System log: Select to send a system log when a trigger is activated.
Click Save to enable the settings, then click Close to exit the page. When
completed, click Save to enable the settings and click Close to exit this page.
The new media settings will appear on the Event Settings page.
Event Settings
In the Event Settings column, click Add to open the Event Settings page. On
this page, you can arrange three elements -- Trigger, Schedule, and Action to
set an event. A total of 3 event settings can be congured.
Event name: Enter a name for the event.
Enable this event: Select to activate this event.
Priority: Set the priority for this event (High, Normal, or Low). The event with
higher priority will be executed rst
Detect next event after * seconds: Select the delay time before selecting
the next event. It is being used for both events of motion detection and digital
input trigger.