Filter
Top Products
i-WATCHER Installation Method 2:
Internet Access Mode: Leased Line, ADSL or Cable Modem
Real IP Address: 1 Static IP address required
IP Sharing or LAN Hub: Enabled with DHCP function
i-WATCHER Network Setup:
LAN Enable (Manually)
Web Server Port Number (Setting required)
User:
1 Static IP address and multiple i-WATCHER
connected to the IP sharing switch or LAN Hub
z
Public IP of the IP sharing switch have to set to a Static IP address (e.g.: 230.80.86.01),
allocate another Private IP address, enable the DHCP function of the IP sharing Hub
z
In each i-WATCHER IP address settings, assign each with different virtual IP, as well as
different port number for the HTTP Port setting.
z
For the setting of the Port switching of the IP sharing switch, please refer to the
i-WATCHER’s IP address and the Port sequence synchronization setting.
z
For remote viewing of i-WATCHER: launch IE browser and enter the IP address of the
IP Sharing switch and the Port Number of the IP-Cam, e.g.: http://230.80.86.01:81
37