Filter
Top Products
i-WATCHER Installation Method 7:
Internet Access Mode: Leased Line, ADSL or Cable Modem
Real IP Address: 1 Static IP address required
IP Sharing or LAN Hub: Must come with DHCP and NAT function
i-WATCHER Network Setup:
LAN Enable (Manually)
Web Server Port Number (Setting required)
User:
1 Static IP address and multiple i-WATCHER
installed
z
Check ADSL dial-up properties from the ISP
z
ISP details: ADSL User-id and password.
z
Connect the given BLUE cable to your i-WATCHER and PC Network card (Lan Card 2)
z
Use the IPEDIT in the CD-ROM to set up the i-WATCHER.
z
Please refer to Page 3 for IP address setting.
z
Launch IE browser of the remote designated PC, go to Network Setup, PPPoE ADV to
fill in the User-id and the password
z
Click on Submit and wait for 5 seconds, disconnect the i-WATCHER power supply and
install the Dial up ADSL Modem
z
Synchronization NAT server Port Number to the i-WATCHER Port number
z
Launch IE browser and enter the Dynamic IP address of the IP-Cam, e.g.:
http://230.80.86.01
42