Filter
Top Products
User’s Manual
stops or missing events.
HOME SETTING
HOME FUNCTION OFF
SELECT MODE PRESET
PRESET POINT 001
RETURN TIME 001
GO ENTER
EXIT YES
• HOME FUNCTION
The item is used to enable or disable the HOME function. Use the left/right direction
keys of the control keyboard to change the setting.
• SELECT MODE
Select one of the modes that the dome should execute when HOME function is
enabled and the RETURN TIME is up. The options are <AUTOPAN>,
<SEQUENCE>, <CRUISE> and <PRESET>. Use the left/right direction keys of the
control keyboard to change the setting, and the bellowing items will change in
cooperating with your selection.
• PRESET
Select a preset point where the dome should go when alarm pin is triggered.
SEQUENCE
Select a sequence line that the dome camera should execute when an alarm pin is
triggered. The Sequence line should be defined prior in SEQUENCE setup menu.
AUTOPAN
Select an auto-pan line that the dome camera should execute when alarm pin is
triggered. The Auto-pan line can be defined in AUTOPAN setup menu.
CRUISE
Select a cruise line that the dome camera should execute when alarm pin is
triggered. The Cruise line can be defined in CRUISE setup menu.
• RETURN TIME
The dome starts to count down RETURN TIME when the dome idles, and will
execute the SELECT MODE function if the return time is up. The RETURN TIME
ranges from 1 to 128 minutes.
• GO
If HOME function is enabled, the users are allowed to execute HOME function
28