Filter
Top Products
User’s Manual
as endpoint.
• START POINT
Follow the description to set the start position of the AUTOPAN path.
1. Move the cursor to <START POINT> and press <ENTER> while <TO FIND>
item flashes, the item will turn <TO SAVE> automatically.
2. Move the dome to a desired position and press <ENTER> to save the position as
the start point; the cursor will move to <END POINT> automatically. Ensure to
set the end point to complete the auto-pan setting.
NOTE: The tilt and zoom value of the start point will be recorded and fixed
for the selected auto-pan line.
• END POINT
Users are able to set the end point after the start point is defined. Pan the dome to
another position and press <ENTER> to save the position as the end point.
• DIRECTION
The item is for setting the AUTOPAN direction of dome camera. The dome will start
to pan clockwise from the start point to the end point if your selection is <RIGHT>,
and then return to the start point. The dome will start to pan anti-clockwise from the
start point to the end point if your selection is <LEFT>. Refer to below diagram.
• SPEED
The item is for defining the dome camera rotation speed while running auto-pan. The
speed is adjustable from 1 to 4; refer to the table below for details.
PAN (degree/sec.)
Speed 1
10
Speed 2
23
31