Filter
Top Products
User’s Manual
manually by selecting this item.
• EXIT
Exit the HOME SETTING menu.
3.3.14 SEQUENCE
The function executes pre-positioning of the pan, tilt, zoom and focus features in a
certain sequence for a camera. Before set up this function, users must setup at least two
preset points.
• SEQUENCE LINE
There are eight sets of sequence lines built in the dome camera. Using LEFT/RIGHT
direction keys to select a line first and then set its sequence points.
• SEQUENCE POINT
Up to 32 points can be specified for each sequence line. The sequence points
represent the orders of the preset points that the dome will automatically run, and
the bellowing setup items; PRESET POSITION, SPEED, and DWELL TIME, are
related to this item.
• PRESET POSITION
Users can assign a specific preset position to the selected sequence point with this
item.
• SPEED
Users can set the Speed that the dome goes to the next sequence point, and the
setup speed range is from 1 ~ 15. Refer to below table for more information.
PAN (degree/sec.) TILT (degree/sec.)
Speed 1 10 8
Speed 2 23 12
Speed 3 35 22
SEQUENCE
SEQUENCE LINE 1
SEQUENCE POINT 01
PRESET POSITION 001
SPEED 1
DWELL TIME 001
RUN SEQUENCE ENTER
EXIT YES
29