User’s Manual
Speed 4 45 30
Speed 5 55 40
Speed 6 65 50
Speed 7 75 58
Speed 8 185 185
Speed 9 205 210
Speed 10 225 240
Speed 11 250 275
Speed 12 280 305
Speed 13 320 335
Speed 14 365 365
Speed 15 400 400
• DWELL TIME
The DWELL TIME is the duration time that the dome will stay at the sequence point,
and the range is from <0> to <127> seconds. The dome will go to the next sequence
point when the DWELL TIME is up. If the setting is <0>, the dome will stay at this
sequence point until users manually move the dome.
• RUN SEQUENCE
User can command the dome camera to run the selected Sequence line manually.
• EXIT
Select the item to exit the SEQUENCE menu.
3.3.15 AUTOPAN
Auto-pan means rotating or scanning side-to-side motion by a dome camera to view an
area horizontally. The parameters can be set on this page.
AUTOPAN
AUTOPAN LINE 1
START POINT
TO FIND
END POINT
TO FIND
DIRECTION RIGHT
SPEED 1
RUN AUTOPAN ENTER
EXIT YES
• AUTOPAN LINE
There are four sets of auto-pan lines built in dome camera. Users can choose a line
to execute using LEFT/RIGHT direction keys. Users are able to command the dome
camera to do continuously panning without limit by setting the start point the same
30