Filter
Top Products
Cleaning the Glass Surface
Open the scanner cover. See Opening the Scanner Cover for instructions.
If the glass surface inside the scanner gets dirty, clean it with a soft dry lint-free cloth. If the glass surface is
stained with grease or some other hard-to-remove material, use a small amount of glass cleaner with a soft cloth
to remove it. Wipe off all remaining liquid.
Caution:
Do not spray glass cleaner directly on the scanner glass.
Make sure that no dust builds up on the glass surface inside the scanner. Dust can cause abnormalities or lines in
your scanned images.
Top
Cleaning the Paper Path Rollers
Open the scanner cover. See Opening the Scanner Cover for instructions.
Wipe the rollers with a cloth dampened with water and thoroughly wrung out.