Filter
Top Products
Customizing Settings 49
Selecting the Video Out Signal
If you have connected an external monitor (as described on
page 19), you may need to change the video output signal
method. When you select
Video Out
, you see this screen:
Choose
NTSC
or
PAL
. (Televisions sold for the North
American market are NTSC.) If you change the setting
while a device is connected, disconnect and reconnect the
Video cable.
Setting the Date and Time
Select
Date and Time
to change these settings:
Press u or d on the arrow button to change the value for
the selected item (such as the year).
To go to the next option (
Month
or
Day
, for example) press
l or r. Then press u or d to change that setting.
After you finish making all settings, press the
OK
button.
Note:
If you remove the P-1000’s battery, the date and time settings
will be erased after about two days; so you’ll need to check and
possibly change the settings. You’ll also need to check the date
and time after changing the battery to make sure they are set
correctly.
Date and Time Settings
Use the up or down button to select the year. Press OK to
apply the setting.
Year:
2003
Month:
01
Day:
01
Hour:
12
Minute:
00
Format:
YYYY.MM.DD