Filter
Top Products
Maintenance and Troubleshooting 53
A fatal error has occurred.
Failed to copy to the
CD-R/RW.
Turn the power off and on again.
If the error message appears
again, confirm that the CD-R/RW
and CD-R/RW drive are not
malfunctioning. Reconnect the
USB cable or try another CD.
A fatal error has occurred.
Press any button to turn
off power.
Turn the power off by pressing
any button and then turn it on
again. If the error appears again,
contact EPSON. (See page 59.)
A file access error has
occurred. Do not eject the
memory card while it is
being accessed.
Wait until the ACCESS light
turns off; then reinsert the
memory card and try again.
An unusually high
temperature was
detected. Photo Viewer
will turn off soon.
The P-1000 is too hot. Let it cool
off before turning it on again.
A printer error has
occurred.
Check your printer and clear the
error.
Battery power is low.
Connect the AC adapter to
ensure proper operation.
Connect the AC adapter to
complete the operation and then
charge the battery.
Error message Description
Cannot continue deleting
files because an error has
occurred. Some files have
been deleted but others
have not. Go to next step.
Some files cannot be deleted or
the memory card may be
write-protected. Check the
memory card and try again.
Cannot find any card
folders. It seems that
nothing has been copied
yet.
There is no card folder in the
specified location. Make sure
the card folder exists and try
again.
Cannot find the Album
Case. It may be renamed
or deleted.
There is no Album Case in the
specified location. Make sure
the Album Case exists and try
again.
Cannot find the album. It
may be renamed or
deleted.
There is no album assigned to
the album shortcut or in the
specified location. Make sure
the album exists and try again.
Cannot find the card case.
It may be renamed or
deleted.
There is no card case in the
specified location. Make sure
the card case exists and try
again.
Failed to save the result.
Cancel the operation and
return to the previous
screen.
Select to Copy could not be
executed correctly. Try again.
Error message Description