Filter
Top Products
IMPORTANT – READ CAREFULLY:
This Process License Agreement (“PLA”) is a legal agreement between you and Sawgrass Technologies,
Inc. (“Sawgrass”). By installing the SubliJet IQ
ink in your printer, or otherwise using the Sawgrass
SubliJet IQ
ink, you agree to be bound by the terms of this PLA. If you do not agree to the terms of this
PLA, Sawgrass is unwilling to license the process of using the SubliJet IQ
ink to you. In such event, you
may not use the SubliJet IQ
ink, and you should promptly contact your supplier for instructions on return
of the unopened package.
The process of using the SubliJet IQ
ink is protected by U.S. and foreign patents. Sawgrass will provide a
complete list of the relevant patents upon request. The use of the SubliJet IQ
ink to practice the patented
process is permitted by this license.
GRANT OF LICENSE
This PLA grants you the following rights: You may install and use the SubliJet IQ
ink
packaged herewith in your EPSON printer to practice the printing process described in U.S. Patent No. 5,488,907.
The use of any ink, dye, or pigment to practice the Sawgrass Process, other than a SubliJet IQ
ink purchased
from Sawgrass or its authorized distributor accompanied by a PLA, is not a licensed use of the Sawgrass
Process. No rights to use the Sawgrass Process, except those specified herein, are granted, and no rights to use
any other process, product, software, or hardware developed or sold by Sawgrass are granted or implied hereby.
LIMITATIONS ON REVERSE ENGINEERING
You agree that you will not attempt to reverse engineer, reproduce,
or deformulate the SubliJet IQ
ink.
PATENTS AND COPYRIGHTS
Sawgrass owns multiple U.S. and foreign patents which apply to the Sawgrass
Process and/or the SubliJet IQ
ink or its use. All patents in and to the SubliJet
ink and the method of using the
SubliJet IQ
ink are owned by Sawgrass Technologies, Inc. You may not copy the printed materials
accompanying the SubliJet IQ
ink. All rights not specifically granted under this PLA are reserved by Sawgrass
Technologies, Inc.
Made In U.S.A.
CAUTION:
For best printing results, use the ink within six months of purchase. Please refer to the individual ink
bag/cartridge for the specific ink expiration date.
Keep out of reach of children.
Do not expose ink to temperatures above 100
º
F or below 40
º
F.
Keep ink out of direct sunshine.
Sawgrass Technologies, Inc. agrees to replace any defective ink within a reasonable time, which shall be
Sawgrass’ sole responsibility for errors or defects in these goods.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE. SAWGRASS SHALL NOT BE LIABLE FOR LOSS OF PROFIT OR OTHER
ECONOMIC LOSS, OR FOR INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES.
SubliJet IQ
®
,
PowerDriver IQ
®
, PowerDriver XG
®
, PowerDriverSupra 1800 XG8
®
and
PowerDriver
Supra
XG
8
,
are registered trademarks of Sawgrass Technologies, Inc. ColorSure™ is a
trademark of Sawgrass Technologies, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Sawgrass Technologies, Inc. disclaims any and all rights in
those marks.