Fisher VCC-WB2000 Digital Camera User Manual


 
Connections
Connecting to a LAN
Use an Ethernet cable to connect the
ETHERNET connector of the camera to the
LANs Ethernet switching hub.
Use a straight-type Ethernet cable.
Connecting to the Internet
Use an Ethernet cable to connect the
ETHERNET connector of the camera to a
device such as a router or ADSL modem that is
connected to the Internet.
If connecting to a router, use a straight-type
Ethernet cable. If connecting to an ADSL
modem or to some other type of device, refer
to the documentation provided with the
device for details on what type of connection
method should be used.
Connecting to a Wireless LAN
This camera can be connected to wired LANs
using an Ethernet cable, and it can be
connected to wireless LANS.
To connect the camera to a wireless LAN,
insert a wireless LAN card into the PC CARD
slot of the camera. You should use only the
recommended wireless LAN cards and
access points.
When a wireless LAN card has been
inserted into the camera, the wireless LAN
basically has priority, but if you change the
network address to a different setting, you
can also use the camera with a wired LAN at
the same time, so that if a connection cannot
be made to the wireless LAN, you can check
the settings using the wired LAN instead.
(A) Inserting the wireless LAN card
Insert the wireless LAN card while checking that
the direction is correct, and then press the eject
button to lock it in.
(B) Removing the wireless LAN card
Press the eject button to eject the wireless LAN
card.
Note:
Consult the place of purchase for the camera
for details on obtaining a recommended
wireless LAN card.
The ambient temperatures should be less
than 40° when the camera is being used with
the wireless LAN card inserted.
PC CARD
RS-232C
ALARM IN OUT
MODEM
PC
COM
AC24V
DC12V
GND
1 2
ETHERNET
POWER
MONITOR
OUT
Ethernet cable
(straight type)
Ethernet switching hub
LAN
CLASS 2 WIRING
PC CARD
RS-232C
ALARM IN OUT
MODEM
PC
COM
AC24V
DC12V
GND
1 2
ETHERNET
POWER
MONITOR
OUT
Internet
Ethernet cable
(straight type)
Router or ADSL modem
CLASS 2 WIRING
PC CARD
RS-232C
ALARMIN OUT
MODEM
PC
COM
AC24V
DC12V
GND
1 2
ETHERNET
POWER
MONITOR
OUT
LAN
Access point
(A)
(B)
CLASS 2 WIRING
L5AB2/US (VCC-WB2000) GB 2002, 7, 4
– 10 –
English