Filter
Top Products
6968
Using the USB Interface Set
●
Connect the camera to your PC using the
enclosed cable and transfer images from the
camera to your PC.
●
The software runs on Windows 98 (including
the second edition) and Mac OS 8.5.1 to Mac
OS 9.0. Note that your PC must be equipped
with a USB port. (The software is not
guaranteed to run on home-made PCs.)
1
➀
Load the SmartMedia.
➁
Set the Mode switch to “D”.
●
!
Use of the AC Power Adapter AC-5V (sold
separately) is recommended (➡P.13). Loss of power
during data transfer will prevent successful data
transfer.
●
!
The Auto Power Off function does not operate when
the camera is connected to a PC.
eBy using the FinePix1400 ZOOM together with other optional Fujifilm products, your system can be
expanded to fill a wide range of uses.
System Expansion Options
➀ ➁