Filter
Top Products
65
4
64
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
SmartMedia. The recorded specifications include information on which frames are to be
printed.
This section gives a detailed description of how to order your prints with the FinePix30i.
On the FinePix30i, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
¢ (➡P.101)
If the “
¢” message appears, you cannot erase the frame. Cancel the “DPOF”
settings and then try again.
‘ (➡P.101)
Up to 999 frames can be specified on the same SmartMedia.
f HOW TO SPECIFY PRINT OPTIONS
(
DPOF
)
PLAYBACK MENU
This function allows you to select whether or not
the date of shooting is included on the print.
1Press the “MENU/OK” button to display the
menu on the LCD monitor.
2Use “d” or “c” to select “fDPOF”.
1Use “b (
])” to select “kDATE”.
2Use “d” or “c” to specify “DATE ON” or
“DATE OFF”. The selected setting is then valid
for all frames with DPOF settings until the
camera is switched off.
Then specify the DPOF settings (➡P.66).
●
!
You must specify whether or not the date is included
before you specify the DPOF settings.
●
!
The DPOF menu is not displayed when a movie or
voice file is selected.
●
!
You may not be able to specify DPOF settings for
some still shots taken on other cameras.
1 2
01 02 01
02
f DPOF DATE SETTING
PLAYBACK MENU