Filter
Top Products
DC IN 3Vsocket
Camera
(USB) socket
USB
socket
PC
87
8
86
21
03
0402
CONNECTING AT PC-CAMERA MODE
Camera Operation PC Operation
1Open the lens cover.
2Slide the Power switch to the right to switch
the camera on.
3Set the “USB MODE” setting in the “SET–UP”
menu to “PC CAM” (➡P.78, 81).
4Slide the Power switch to the right again to
switch the camera off.
1Switch your PC on.
2Use the special USB cable to connect the
camera to your PC.
3Switch the camera on.
Always use the prescribed procedure when disconnecting
or switching off the camera (➡P.88).
●
!
You should use the AC power adapter when the
camera is connected to your PC (➡P.22, 91). Loss
of power during data transmission can prevent
successful data downloading.
●
!
Take care to connect the plugs on the special USB cable into the
correct sockets, and ensure that the plugs are inserted firmly.
If you are using a Windows PC, proceed as follows
when installation is completed.
Windows 98/98SE/Me/2000:
The driver settings are specified automatically. No
further action is required.
Windows XP:
When the confirmation dialog box appears, click the
“Continue” button.
✽ If your PC fails to recognize the camera, refer to the
Software Quick Start Guide.
●
!
Do not disconnect the USB cable when the camera
is communicating with the PC. See P.88 for
information on the disconnection procedure.
i The viewfinder lamp alternately blinks green
and orange while the camera is communicating
with your PC.
i “PC CAM” appears on the screen.
i The camera does not automatically switch off
when a USB connection is being used.
i FinePixViewer automatically starts up and the
PictureHello window opens (Windows only).
i
You can use software
such as VideoImpression
to view live images.
✽ Screen for Windows 98SE
✽ Screen for Macintosh
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your PC. Refer to the Software
Quick Start Guide booklet and complete the
required PC setup procedures. Then reconnect
the camera to your PC.
01