17
1
16
REMOVING THE SmartMedia
™
Grip the SmartMedia and pull it out, taking care
that the batteries do not fall out of the camera.
1Check that the indicator in the viewfinder lamp
is green (➡ P.25).
2Then switch the camera off.
3Always ensure that the battery cover is facing
upwards when you open it.
Never open the battery cover while the camera
is still switched on as this could corrupt the
image files on the SmartMedia or damage the
SmartMedia itself.
●
!
To protect the SmartMedia, always store it in the
special anti-static case.
2
h See P.64, 90 for information on printing
images.
h See P.83-89 for information on downloading
images to a PC.
◆
Printing Images and Downloading
Images to a PC
◆
03
1
●
!
See P.17 for information on switching the camera on
and off.
OPENING/CLOSING THE LENS COVER
Open and close the lens cover by sliding it down
and up diagonally.
●
!
Slide the lens cover until it locks into place.
●
!
Take care not to touch the lens directly while the
lens cover is open.
SWITCHING ON AND OFF
1To turn the camera on or off, slide the Power
switch to “$”.
2Sliding the Power switch to “%” allows
you to use the camera as a music player.
3When you do not want to listen to music, slide
the Power switch to the middle position.
●
!
Note that you cannot use the FinePix30i as a camera
when the Power switch is set to “
%”.
02
03
If the camera is not used in any way for roughly 2 minutes, the Auto Power Off function always switches
the camera off to reduce power consumption. You cannot disable this function. However, the Auto Power
Off function does not operate in sound sync. mode (➡P.43), audio recording (➡P.51) or playback of audio
recordings (➡P.58), or when the camera is connected via the USB interface (➡P.83).
◆
Auto Power Off function
◆
0101 02