Filter
Top Products
19
Using the Camera
2
18
Photography: Press “T” to zoom in (telephoto).
Press “W” to zoom out (wide-angle).
Playback: Press “T” to enlarge the image.
Press “W” to revert to normal display.
DISP: Press this button to select the
screen display.
BACK: Press this button to stop a
procedure midway through.
The screen brightness is increased briefly.
1Display the menu.
Press the “MENU/OK” button.
4Confirm the setting.
Press the “MENU/OK” button.
3Select a setting.
Press the up or down arrow on the
4-direction button.
Photography: d button
Turns Macro ( ) on
and off.
c button
Sets the flash ( ).
Playback: Change frame or movie
frame advance.
Instructions for the next step in the procedure
appear at the bottom of the screen. Press the
button indicated.
For example, to trim the image as shown in
the figure at right, press the “MENU/OK” button.
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is shown
as “a” or “b”, and left or right is shown as “d” or “c”.
◆ Displaying the on-screen help ◆
0 Zoom button
Low light viewfinder button
0 DISP / BACK button
0 dc button
0 Using the menus
2Select a menu option.
Press the left or right arrow on the 4-
direction button.
0 Photo mode ( ) button
Photography: Select the quality (number of
recorded pixels), sensitivity and
FinePix COLOR settings.
Playback: Specify the print order (DPOF) settings.
0
Diopter adjustment dial
Makes the image in the viewfinder easier
to see. Set the dial to the position where
the AF frame appears sharpest.
0
EVF/LCD (monitor selector) button
Pressing the “EVF/LCD” button toggles between
the viewfinder (EVF) and the LCD monitor. Use
whichever mode is best suited to your shot.
0
Flash pop-up button
To use the flash, press the Flash pop-up button
to release the flash.
EVF
LCD
BASIC OPERATION GUIDE