Filter
Top Products
9998
Specifications
System
Model Digital camera FinePix F700
Effective pixels 6.2 million (S-pixel: 3.1million, R-pixel: 3.1million) pixels
CCD 1/1.7-inch Super CCD SR
Total 6.7 million (S-pixel: 3.35 million, R-pixel: 3.35 million) pixels
Storage media xD-Picture Card (16/32/64/128/256/512 MB)
File format Still image: JPEG (Exif ver. 2.2)
✽ Design rule for Camera File System compliant DPOF
compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Number of recorded pixels Still image: 2832 × 2128 (6.03 million) pixels/2048 × 1536 pixels/
1600 × 1200 pixels/1280 × 960 pixels (
5/3/2/1)
Movie: 640 × 480 pixels (30 frames per second with monaural sound)
320 × 240 pixels (30 frames per second with monaural sound)
Lens Super EBC Fujinon 3× zoom lens,
Aperture: F2.8-F8 (Wide-angle) F4.9-F14 (Telephoto)
Focal length 7.7 mm-23.1 mm (Equivalent to 35 mm-105 mm on a 35 mm camera)
Focus TTL contrast-type, Auto focus, Manual focus
Focal range Normal: Approx. 60 cm (2.0 ft.) to
∞
Macro: Approx. 9 cm (3.5 in.) to 80 cm (2.6 ft.)
Shutter speed 3 sec. to 1/2000 sec. (depend on Exposure mode)
Aperture F2.8 to F8 10 steps in 1/3-EV increments Manual/Auto selectable
Sensitivity
B: Equivalent to ISO160-400 (at LCD on and Flash off )
Manual: Equivalent to ISO200/400/800/1600 (Resolution fixed at
1 for
shots taken at ISO 1600.)
Photometry TTL 64-zones metering Multi, Spot, Average
Exposure control Program AE (
B, N, ?), Shutter-priority AE, Aperture-priority AE,
Manual exposure
Exposure compensation –2 EV to 2 EV in 1/3-step increments (in Manual mode)
White balance Auto (
B, ?)
Manual modes, 8 positions can be selected (N, <, M, >)
Viewfinder Real image optical Approx. 80% coverage
LCD monitor 1.8-inches, 134,000-pixel CG silicon TFT, Approx. 100% coverage
Flash Type Auto flash using flash control sensor
Effective range: Wide-angle: Approx. 0.3 m-5.0 m (1.0 ft.-16.4 ft.)
(Approx. 0.3 m-0.8 m (1.0 ft.-2.7 ft.): Macro)
Telephoto-angle: Approx. 0.6 m-4.0 m (2.0 ft.-13.1 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash,
Slow Synchro, Red-Eye Reduction + Slow Synchro
Self-Timer 2 sec. /10 sec.
Video output NTSC/PAL selectable
■ Standard number of available shots/recording time per xD-Picture Card
Quality
5 6M
Number of recorded pixels
2832 × 2128
Image Data Size 1.5 MB
DPC-16 (16 MB) 10
3 3M
2048 × 1536
780 KB
19
2 2M
1600 × 1200
620 KB
25
1 1M
1280 × 960
460 KB
33
21 40 50 68
42 81 101 137
85 162 204 275
171
343
325
651
409
818
550
1101
CCD-RAW
2832 × 2128
12.9 MB
1
2
4
9
19
39
% (30 fps)
640 × 480 320 × 240
–
Approx. 13 sec.
Approx. 27 sec.
Approx. 55 sec.
Approx. 111 sec.
Approx. 223 sec.
Approx. 7.4 min.
$ (30 fps)
–
Approx. 26 sec.
Approx. 54 sec.
Approx. 109 sec.
Approx. 219 sec.
Approx. 7.3 min.
Approx. 14.6 min.
DPC-32 (32 MB)
DPC-64 (64 MB)
DPC-128 (128 MB)
DPC-256 (256 MB)
DPC-512 (512 MB)
The image is blurred.
There is speckling on
the image.
The camera does not
emit any sound.
Frame erase does not
erase the frame.
The ERASE ALL
function does not erase
all the frames.
There is no image or
sound on the TV.
When the camera is
connected to a personal
computer (PC), the shot
image appears on the
camera’s LCD monitor.
Nothing happens when
I use the camera
switches.
The camera no longer
works correctly.
i The lens is dirty.
i You photographed scenery with Macro
mode selected.
i You took a close-up shot without
selecting Macro mode.
i You are shooting a subject that is not
suited to autofocusing.
The shot was taken with a slow shutter
speed (long exposure) in a high-
temperature environment.
i The camera volume is set too low.
i The microphone was blocked during
shooting/recording.
i There is something covering the speaker
during playback.
i Some frames may be protected.
i The Power switch is set to a photography
mode.
i An A/V cable was connected during
movie playback.
i The camera is not connected to the TV
correctly.
i “TV” is selected as the TV input.
i The TV volume is turned down.
i The special FinePix F700 USB cable is
not properly connected to the computer
or camera.
i The PC is not switched on.
i Camera malfunction.
i The battery is exhausted.
The camera has suffered an unforeseen
problem.
i Clean the lens.
i Cancel Macro mode.
i Select Macro mode.
i Use AF/AE lock to take the shot.
This is a characteristic of CCDs and does
not indicate a camera fault.
i Adjust the volume.
i Take care not to block the microphone
during shooting/recording.
i Ensure that the speaker is uncovered.
i Remove the protection.
i Set the Power switch to Playback mode.
i Connect the camera and TV correctly.
i Connect the camera and TV correctly.
i Set the TV input to “VIDEO”.
i Adjust the volume.
i Set up the camera and the special
FinePix F700 USB cable correctly.
i Switch the PC on.
i Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power
adapter and try again.
i Load a new fully charged battery.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
Troubleshooting Possible causes Solutions
Troubleshooting
eIf you think the camera is faulty, check the following once more.