Filter
Top Products
6.3.3 IMAGE CONTROL command
This command sets the scanner to the operation mode of the image processing
circuit.
Byte 1
CNT
Byte 2
CMD
Byte 3
TEXT
Byte 4
or later
X©0xπ X©5Aπ
Image control
register start
number.
Image control
register
Third byte
7 6 5 4 3 2 1 0
LSB
Image control register start number.
Not defined (always ™0∫)
Note:
If this command is sent to the scanner without image processing option (IPC ¬),
the scanner sends ™Operation error∫ as response.
6 $ 20 50FH5037E>02