Fujitsu 50FH5037E-02 Photo Scanner User Manual


 
Image control register
When the image processing option (IPC ¬) is connected, the following image
processing can be executed. This register sets the image processing mode.
$ Image area automatic separation function (simultaneous reading of characters
and photographs)
$ Inversion function (black/white conversion)
$ Mirror image output function (right/left conversion)
$ Image emphasis, outline extraction function
$ Overlay function
$ Symplified dynamic threshold
$ Zooming function ranging from 25% to 400% in 1% increments.
$ Function to change the reading mode of a section in the main window
(subwindow function) (*3)
The method of image processing can be separately specified for the main window
and subwindow.
*3: This function is executed by the subwindow control command described later.
(a) Image control register #0
#0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
LSB
X©00π is set when the power is turned on or the initial state is specified by the
CLEAR command.
This register must be sent before setting the image control registers #1 to #8.
50FH5037E>02 6 $ 21