Filter
Top Products
3. The pointer is displayed on the monitor screen. The area of a mask can be edited by using this
pointer. At first, move the cursor to the upper left position you want to make a mask and press the
SW. Next, move the cursor to the lower right position you want to make a mask and press the SW.
In the above procedure, a mask can be made.
MASK ERASE
The made mask is erased.
Erasing procedure
1. Move the cursor to MASK ERASE.
2. The made mask is erased by pressing the SW.
Note) When two or more masks are made, the mask is erased contrary to the making order.
(3-7) TITLE
You can assign a name to the camera, and display on the monitor.
Fig.9-7 TITLE menu
TITLE
The title display can be switched ON or OFF on the monitor screen.
TITLE EDIT
The display character can be edited. The title consists of up to 16 alphanumeric characters.
Editing procedure
1. Move the cursor to TITLE and select ON.
2. Move the cursor to TITLE EDIT and press the SW. TITLE EDIT menu is displayed.
3. Move the cursor to the character you want to edit. After selecting the character, and press the SW.
The selected character appears in the editing area.
4. Repeat the steps above until all characters are edited.
5. To clear the character, move the cursor to BS and press the SW. Whenever the SW is pushed,
one character is deleted.
En-20
TITLE
TITLE → ON
TITLE EDIT →
RETURN END
TITLE EDIT
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
0123456789-/
RETURN BS