Filter
Top Products
EXTERNAL CONTROL INPUT TERMINAL
This camera has an external control input terminal and can be operated remotely by supplying a
control signal to this terminal.
CONNECTIONS
Connections of control signals are as follows.
Pin1
Pin7
Magnified Figure
Fig.16
Pin No. Description
1 A (+)
2 B (-)
3 GND
4 A (+)
5 B (-)
6 GND
7 D&N Control Signal Input
If you operate cameras remotely by using this terminal, connect the following enclosed cable.
We recommend to extend it with a twisted pair cable.
Pin7
Pin1
Brown
Black
White
Red
Black
White
Red
Fig.17
Note)
Turn off the power supply of the camera and connect the cable.
Use the extension cable which has the same characteristic impedance as the terminating resistance.
(100ohms)
En-24