(6) MODE SAVE
Current settings can be saved. Saved settings can read by selecting USER MODE of MODE
SELECT.
Fig.12 MODE SAVE menu
Operation procedure
1. After changing parameters and adjustments, move the cursor to MODE SAVE and press the SW.
MODE SAVE menu is displayed.
2. Move the cursor to OK and press the SW. Parameters and adjustments are saved.
3. The screen automatically reverts to the MAIN MENU when the save of setting ends.
(7) BLEMISH COMPENSATION
Blemish of CCD is automatically detected and compensated.
This function can protect the picture quality though a simple operation.
Fig.13 BLEMISH COMPENSATION menu
Operation procedure
1. Cover the lens during use so that no light enters. Move the cursor to BLEMISH COMPENSATION
and press the SW. BLEMISH COMPENSATION menu is displayed.
2. Move the cursor to OK and press the SW. The compensation is executed.
3. The screen automatically reverts to MAIN MENU when the compensation is finished.
Note)
Even if this function is executed, Blemish of CCD will not be compensated completely.
While selecting SENS UP function, Blemish of CCD may appear in the picture permanent. This is a
normal phenomenon.
The structure of the mechanical iris lens aperture prevents complete of blocking light. When the
mechanical iris lens is used, perform in dark environment or apply the lens cap to shade the lens.
En-22
MODE SAVE
CURRENT SETTINGS
ARE SAVED.
OK CANCEL
BLEMISH COMPENSATION
COVER THE LENS
OK CANCEL