Gateway DC-M40 Digital Camera User Manual


 
READY
25
PREPARATION
Instructions on how to use the CF CARD
• Using a new CF CARD for the first time
• Before using the CF CARD, it must be formated.
• Initializing prepares the CF CARD for recording data.
• For more details, please refer to page 63.
• Preserving the CF CARD data
• If the card is subjected to any of the following, the recorded data may
become corrupted:
• When the CF CARD is used incorrectly.
• If the power is turned off while recording, deleting, formatting or reading.
• It is advisable to copy important data onto other media as back-up e.g. flop-
py disks, hard disks, CD etc.
• Gateway cannot be held responsible for lost data.
• Important information on the use of the CF CARD
• If you switch off this camera while it is reading, initializing or playing, the
information on the CF CARD may be corrupted.
• The CF CARD is an electronic precision device. Do not bend, drop or subject
the card to any heavy impact.
• Do not store the CF CARD in an environment with strong electronic or
magnetic fields,for example near loud speakers or TV receivers.
• Do not use or store in an environment where there are extremes of tempera-
ture.
• Do not allow the CF CARD to become dirty or to come into contact with any
liquid.Should this happen, clean the card with a soft cloth.
• Keep the CF CARD in its case when not in use.
• During and after periods of extended use, you may notice that the CF CARD
is warm. This is normal.