Filter
Top Products
ADVANCED
36
SETTING UP THE SHOOTING FUNCTION
Selecting Auto flash
FLASH / LEFT button
• When the menu is displayed on the LCD monitor, pressing the LEFT ( ) button
makes the cursor shift to the left or to the main menu.
• When the menu is not displayed on the LCD monitor, the LEFT ( ) button
operates as the FLASH ( ) button.
• Use the correct flash to suit the environment.
1. Rotate the mode dial to the SHOT mode.
2. Do not turn the LCD monitor off.
3. Press the FLASH ( ) button until the desired FLASH
mode indicator displays on the LCD monitor and LCD
panel indicator.
Note
• Photograph within the flash range. The flash ranges are listed below.
ISO Wide Telephoto
MACRO SHOT mode A 1.6ft(0.5m)~2.6ft(0.8m)
STILL IMAGE mode A 2.6ft(0.8m)~9.8ft(3m) 2.6ft(0.8m)~6.5ft(2m)
• The image quality is not guaranteed if the subject is too close or highly
reflective.