Filter
Top Products
8 TruVision Mini PTZ 12X Camera
Pocket Guide
7. Further secure the
bubble by turning the
two slotted screws
counterclockwise so
that they touch the
dome camera housing.
8. Set the DIP switches.
Setting up the camera
To quickly put the Mini PTZ 12X camera into operation
1. Configure the camera’s DIP switches, which are located
on the top of the camera.
2. Set the camera communication protocol.
3. Set the RS-485 communication DIP switch.
4. Set the camera ID.
5. Wire the camera.
6. Connect the camera to a monitor.
7. Mount the camera to the ceiling. See the user manual for
information.
8. Program the camera.