Filter
Top Products
TruVision Mini PTZ 12X Camera 17
Pocket Guide
Using a keypad to program menus
Use a control device such as a control keypad to configure the
camera menu options. This manual uses the KTD-405 keypad
controller to explain the features of the TruVision PTZ Mini 12X
camera because of the KTD-405’s ability to control all of the
camera’s features. (For detailed keypad instructions, refer to
the KTD-405/KTD-405-2D Controller Keypad User Manual.)
You can record the settings for the dome cameras using the
checklist in User Manual. This checklist also lists the default
values of the settings, where applicable.
To access the programming menus
1. Switch the keypad to the camera site you want to
program.
2. Press and hold the set key until “Enter programming code”
displays.
3. At the code entry display, enter the programming code 9,
5, 1. Then press the seq button.
4. At the first menu display, press 3 to select the option
Camera.
5. At the “Enter camera site number” screen, enter the site
number of the camera you wish to program. Camera
default value is 1. The Main Page 1 menu appears.
Navigating the menus
You can use the keypad keys and joystick to navigate through
the menu system. See the user manual for further information
on their use.