TruVision Mini PTZ 12X Camera 9
Pocket Guide
Camera DIP switches
Configure the camera’s ID and communication protocol before
connecting the analog camera to other devices. See Figure 1
for the location of the DIP switches in both the indoor and
outdoor cameras.
Figure 1: Camera DIP switches
Indoor camera Outdoor camera
A. Dome camera protocol DIP
switches
B. RS-485 communication DIP
switches
C. None
D. 22-pin connector
E. Dome camera site ID DIP
switch
F. Reserved
G. Reserved
Setting the camera protocol
The dome camera can use different protocols for
communication. To select a protocol, you must set the protocol
DIP switches to the correct sequence of 1s (on) and 0s (off).