Filter
Top Products
TruVision Mini PTZ 12X Camera 13
Pocket Guide
Wiring the dome camera
The TruVision Mini PTZ 12X Camera is shipped with a 24 VAC I/O
interface cable (see Figure 4). This cable facilitates installation
as there is only one cable to connect to the dome camera.
Figure 4: 24 VAC I/O interface cable
1. Power input cable
2. Video output cable
3. Alarm cable
4. RS-485 serial data
connector
5. 22-pin connector (to
camera)
Note: Power input to the camera has a tolerance of 24 VAC
±10%.
Caution: During installation carefully pull the cables so as not
to damage them. It is recommended to fasten the cables once
they are connected.