Filter
Top Products
SKU 94634 For technical questions, please call 1-800-444-3353 PAGE 2
PRODUCT SPECIFICATIONS
Electrical Requirements 115 V~ / 60 Hz
Amperage 5.5 (Start-Up) / 3.2 (No Load)
Motor 3/4 HP; 1730 RPM
Power Switch 2-Position (ON/OFF) Slide
Power Cord 5’1” Long / 14 AWG x 3C (SJT)
Power Plug 3-Prong, Grounded
Wheel Type Pneumatic / 8-1/2” Diameter x 2” Wide / 30 PSI Inflation Rating / 2-Ply
Concrete Opening 17-7/8” Long x 9-3/8” Wide
Overall Dimensions 42” Long x 19” Wide x 34” High
Accessories 4” x 6” Mower’s Edge Slip Form
4” x 6” Slant Style Slip Form
4” x 6” Curb Style Slip Form
Additional Features Quick Feed Hopper with Hopper Handle
Extended Power Stroke Compaction Ram
Quick Release Slip Forms
Red Powder-Coated Exterior Housing
Unit Weight 168 lb.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, op-
erating, inspection, maintenance and cleaning procedures, parts list and assem-
bly diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit.1. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such as in the pres-2.
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. 3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.