Filter
Top Products
46 hp photosmart 812 user’s manual
Unloading images to a computer
using the dock
NOTE If you are using a Macintosh computer, switch the
camera to Disk Drive in the USB Configuration menu
found in the Setup menu.
1 Check that the HP camera dock is connected to your
computer.
2 Place the camera in the HP camera dock. It will turn on
automatically.
3 Press the button on the dock to start the unload
process. The HP Image Unload software will launch on your
computer, and the images in the camera will automatically
unload to the computer. If there were any images on the
camera that had been selected in the Share menu for
printing or e-mail, those actions are started after the images
have been unloaded to the computer.
4 When the unload screen says “Finished”, your images have
been saved and shared. You can now take the camera out
of the dock, or leave it there to recharge the camera
batteries.
Printing images using the dock
1 Check that the HP camera dock is connected to your printer.
(The dock cannot be connected directly to both a computer
and a printer at the same time).
2 Place the camera in the HP camera dock. It will turn on
automatically.
3 Press the button on the dock to start printing.
4 The Print Setup screen appears on the camera. Follow the
on-screen instructions to complete the printing process.