Filter
Top Products
7-Troubleshooting 63
Error messages
Error messages on the Display
Message Possible cause Solution
Unable to focus The subject did
not provide
enough contrast
for the camera
to focus
properly.
You can lock the focus by
pointing at your subject
and then pressing and
holding the Shutter
button halfway down
while you re-frame your
subject. When the green
light comes on, press the
Shutter button all the way
down.
Focus too far The focus
distance is
beyond where
the camera can
focus.
Make sure the camera is
not in Macro setting.
Focus too close The focus
distance is
closer than the
camera can
focus.
Put the camera in Macro
setting or, if in Macro
setting, move further
away from the subject.
Low light It is too dark to
take a properly
exposed
picture.
Try turning on the Auto
Flash.