Filter
Top Products
Hardware options installation 28
6.
Secure the cable with the cable tie.
7. Install the access panel.
8. Power up the server (on page 6).
Cabling an HP 8 Internal Port SAS/SATA Host Bus Adapter with RAID card (ML150
G3)
1. Power down the server (on page 6).
2. Remove the access panel ("Access panel" on page 11).
3. Install the card.
For more information, see the documentation that ships with the option and see "Expansion board
options (on page 42)."
4. Connect the LED cable to the card and to the system board.
5. Unfasten the cable tie.