Filter
Top Products
16 hp photosmart 930 series user’s manual
Installing the batteries
1 Open the battery door on
the bottom of the camera.
2 Insert the batteries as
indicated inside the door.
3 Close the battery door.
NOTE For more information about batteries, see Managing
batteries on page 100. You can also use an optional HP
AC power adapter to power the camera and recharge
batteries in the camera. For more information about the
HP AC power adapter, see Purchasing camera accessories
on page 103.
Installing the memory card
1 With the camera turned off and
the back of the camera facing you,
open the memory card door by
sliding the door to the right.
2 Insert the memory card, making
sure that it snaps into place.
3 Close the memory card door.
To remove the memory card, first
make sure the camera is turned off.
Open the memory card door, then
push the memory card in and it will
spring outward from the connector.