Filter
Top Products
78 hp photosmart 930 series user’s manual
The camera
batteries will
not charge.
(continued)
The wrong AC
power adapter
is being used.
Use only the HP AC power
adapter approved for use with
this camera. See Purchasing
camera accessories on
page 103.
The batteries
are damaged
or bad.
NiMH batteries degrade over
time and can fail. If the camera
detects a problem with the
batteries, it will not start charging
or will stop charging prematurely.
Purchase new batteries.
The Power/
Memory light
blinks as if
the batteries
are being
recharged,
but there are
no batteries
installed.
The camera
does not
recognize that
there are no
batteries
installed.
Do nothing. The blinking is
harmless and should stop after
5-30 minutes.
The wrong
date and/or
time is
shown.
The batteries
are drained
or were
removed from
the camera for
too long.
The date and time will be
maintained for about 10 minutes
without batteries installed. Reset
the date and time by using the
Date & Time option in the Setup
menu. (See Date & time on
page 72.)
Problem Possible cause Solution