Hitachi DZMV230A Camcorder User Manual


 
63
English
This DVD video camera/recorder is equipped with power save function. Specify “Power Save: On”: If
the DVD video camera/recorder is left in the recording pause status without being operated for 5 min-
utes, it will automatically turn off to prevent the battery from discharging needlessly.
1
Press the MENU button.
The menu screen will appear.
2
Use the joystick to
choose “Power Save”
on the “Initial Setup”
menu screen, and then
press the button.
The options will appear on the right of “Power
Save”: The mark will be attached to the cur-
rently selected option.
3
Use the joystick to
choose “On” or “Off”,
and then press the
button.
4
Press the MENU button.
The menu screen will disapear.
Note: The power save setting information does
not appear in the on-screen display, and this set-
ting will not change when the DVD video cam-
era/recorder is turned off.
Note: If you want to use up the battery when you
have no intention of using the DVD video cam-
era/recorder for a long time, specify “Power Save:
Off”.
Note: To turn the DVD video camera/recorder on
again from automatic off activated by the power
save function, set the power switch to “POWER
OFF”, and then set it to “
VIDEO” or “ PHOTO”.
This DVD video camera/recorder will emit sound when the power switch is changed over, the REC button
is pressed, or other operations are engaged. If you do not need operating sound, you can switch it off.
1
Press the MENU button.
The menu screen will appear.
2
Use the joystick to
choose “Beep” on the
“Initial Setup” menu
screen, and then press
the button.
The options will appear on the right of “Beep”:
The mark will be attached to the currently se-
lected option.
3
Use the joystick to
choose “On” or “Off”,
and then press the
button.
4
Press the MENU button.
The menu screen will disappear.
Note: The “Beep” setting will not change even if
the DVD video camera/recorder is turned off.
Switching Operating Sound On or Off
Initial Settings
Setting or Releasing Power Save