Filter
Top Products
Identifying HSL and SPCN Cables
Use the following tables to identify your High Speed link (HSL) and System Power
Control Network cables. Your system uses HSL cables to communicate with your
expansion unit. Your system uses SPCN cables to control power to your expansion
unit.
Depending on your requirements, you might not have every HSL or SPCN cable
listed below.
Table 2. HSL Cables
Feature Number CCIN Number Length Part Number
1460 (copper) 0343 3 Meters 44L0005
1461 (copper) 0361 6 Meters 97H7490
1462 (copper) 0368 15 Meters 97H7491
1470 (optical) 1470 6 Meters 21P5014
1471 (optical) 1471 30 Meters 21P5015
1472 (optical) 1472 100 Meters 21P5016
1473 (optical) 1473 250 Meters 21P6326
1474 (copper) 1474 6 Meters 21P5477
1475 (copper) 1475 15 Meters 21P5458
1481 (copper) 1481 1 Meter 21P5454
1482 (copper) 1482 3.5 Meters 53P2676
1483 (copper) 1483 10 Meters 21P5456
1485 (copper) 1485 15 Meters 21P5457
Table 3. SPCN Cables
Feature Number CCIN number Length Part Number
1463 9206 2 Meters 87G6235
1464 9219 6 Meters 21F9469
1465 9213 15 Meters 21F9358
1466 9214 30 Meters 21F9359
0369 (optical) 0369 100 Meters 21F9415
1468 (optical) 1468 250 Meters 21P6325
Planning your cable layout
When you decide where to place your cables, follow your site plan and keep the
following things in mind:
v Refer to
http://www.ibm.com/eserver/iseries/infocenter
and select Plan for hardware and software—Cabling instructions
v Avoid creating a safety hazard.
v Avoid damaging the cables.
v Avoid placing cables parallel to high-voltage lines.
2 Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2