IBM 5074 Film Camera User Manual


 
__ 1. Find the HSL cables and the SPCN cables in the information that is
shipped with your expansion unit. You will use three HSL cables and two
SPCN cables to perform this procedure.
__ 2. Attach a label to each end of the cables. Label each of the cables as follows:
__ a. Label the two ends of the first cable 0.
__ b. Label one end of the second cable 0 and the other end 1. If you have
different length cables, this cable should be the shortest one.
__ c. Label the two ends of the third cable 1.
__ 3. Locate an available HSL connector on your system unit.
Figure 12. HSL Connections
Figure 13. SPCN Connections
20 Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2