Filter
Top Products
- 8 -
CV-M10BX/CV-M10RS
7. Mode Settings
7.1. Mode Setting by Switch
The mode setting switch SW1 on rear for CV-M10BX and CV-M10RS is different for switch SW1-1 to SW1-3 and SW1-7 to SW1-
8. For BX the shutter values can be selected in 3 ranges depending of the internal SW1 on the PK 8206 board. The switch
select between Normal, High speed or Low speed. In the following the switch settings are shown.
7.1.1. M10BX Internal Switch SW1 Settings (On PK8206)
7.1.2. M10BX Switch SW1 Settings (On rear panel)
Note: The shown switch settings are the factory setting. Values are shown for EIA.
7.1.3. M10RS Switch SW1 Settings (On rear panel)